FARGO STICKY CARD ID CARD PRINTER & CONSUMMABLE ORDERING NUMBER: CAD00247

FARGO >> STICKY CARD

Zoom

FARGO ID CARD PRINTER & CONSUMMABLE STICKY CARD
Part Number: C50F0BA
Order Number: CAD00247

82266 C50F0BA PVC STICKY CARD 0.5MM WITH BACK ADHESIVE FOR CARD PRINTER IDEAL FOR PROXIMITY CARD USAGE

Introduction

500-pack Ultracard 10 Mil Cards CR-80 SZ Adhesive Mylar Backed. The sticky card 82267 is a Mylar adhesive-backed standard blank PVC cards. These adhesive back cards are ideal for use with RFID type cards that are too thick for some ID card printers. To use these cards customers usually print card information on the thin card, and then affix this card to the RFID card. The Mylar backing provides greater thickness for easier feeding, plus increased heat resistance for laminated applications.

The UltraCard cards provide glossy, scratch and debris reduced, high-quality laminated surfaces, and are recommended for use with Fargo Electronics direct-to-card printer/encoders.

Features

Card Size: CR-80 3.38" x 2.12" (CR8030)

Adhesive backed Cards

Clean surface

Ideal for card printer

Specification

Part No.	082267
Format	White, Superior Grade PVC ID Cards. CR-80, 0.10 mil thickness, 3.375" x 2.125"
Special Features	The Mylar backing provides greater thickness for easier feeding, plus increased heat resistance for laminated applications.
Count	500 Cards - 5 packs of 100 ID Cards
Remarks	Please check your card printer specifications before purchasing With the adhesive backing, this card is about 0.25 mil thick. These may not work well in all ID Card printers

BROCHURE

Ask For Quote